Ketron PEEK-GF30
(Colours: Natural (Brownish grey) only)
This 30% glass fibre reinforced grade offers a higher stiffness and creep resistance than Ketron PEEK-1000 and has a much better dimensional stability. This grade is ideal for structural applications supporting high static loads for long periods of time at elevated temperatures. The suitability of Ketron PEEK-GF30 for sliding parts, however, is to be carefully examined since the glass fibres tend to abrade the mating surface.
Main Characteristics
| Very high max. allowable service temperature in air (250°C continuously going up to 310°C for short periods) |
| High mechanical strength, stiffness and hardness, also at elevated temperatures |
| Excellent chemical and hydrolysis resistance |
| Excellent wear & frictional behaviour (particulary PEEK HPV and PEEK CA30) |
| Very good dimensional stability |
| Inherent low flammability and very low levels of smoke evolution during combustion |
| Good electrical insulating and dielectric properties (except for PEEK HPV and PEEK CA30) |
| Excellent resistance against high energy radiation (gamma and X-rays) |
| Food contact compliant composition (PEEK 1000 Nat & PEEK TX) |
Material Datasheet (206kb)
Safety Datasheet (179kb)
<back
