Ketron PEEK 1000
(Colours: Natural (Brownish grey) and Black)
Ketron PEEK-1000 stock shapes are produced from virgin polyetheretherketone resin and offer the highest toughness and impact strength of all Ketron PEEK grades. The composition of the raw materials used for the production of the Ketron PEEK-1000 natural stock shapes complies with the directives of the Europen Union and the American FDA regulations concerning plastic materials intended to come into contact with foodstuffs. These faetures, added to its excellent sterilisability by means of steam, dry heat, ethylene ocide and gamma radiation mate his grade very popular in medical, pharmaceutical and food processing industries.
Main Characteristics
| Very high max. allowable service temperature in air (250°C continuously going up to 310°C for short periods) |
| High mechanical strength, stiffness and hardness, also at elevated temperatures |
| Excellent chemical and hydrolysis resistance |
| Excellent wear & frictional behaviour (particulary PEEK HPV and PEEK CA30) |
| Very good dimensional stability |
| Inherent low flammability and very low levels of smoke evolution during combustion |
| Good electrical insulating and dielectric properties (except for PEEK HPV and PEEK CA30) |
| Excellent resistance against high energy radiation (gamma and X-rays) |
| Food contact compliant composition (PEEK 1000 Nat & PEEK TX) |
Material Datasheet (206kb)
Safety Datasheet (179kb)
<back
